Full Colour 3D Printing

We invested a Projet 660 / Zprinter 650 to print our own creation, it printed with high performance composite powder in full colour. Projet 660 / Zprinter 650 is so far the only 3D printer in the market can do High Resolution Full Colour Printing.

The printing cost is base on the size of your model, it might not as low as you expect, due to all materials and parts are imported and the price is increasing occasionally . To let more people such as student, designer, 3D artist or sculptor to have their own creation printed in 3D tangible object, we will try to keep the printing cost affordable. There are different method to calculate the printing cost and we will charge you with the lower cost, how about that?

You might want to check out the printer specs:
Resolution: 600 x 540 dpi
Colour: Full CMYK 390,000 colors (top-of-the-line color)
Layer Thickness: 0.004 inches (0.1 mm)
Print Head: 5 (C, M, Y, K, Clear) The black is True Black compare to 2 print head printer.

Want to print your 3D model?

Click here to get quote now!

Our Sockaroos creator

Printer introduction

Design Guide

File format

.stl and .wrl

Part without colour (white): .stl
Part with colour: .wrl (zip your texture map together with .wrl)
.stl and .wrl can be exported from most 3D modeling software.

Max print size

fcs_print_guide_icon_maxb01250 x 380 x 200mm

Make sure your part can fit in our maximum print size. You will have to split your part into few smaller pieces.

Min supported part thickness

fcs_print_guide_icon_supwt012mm

Minimum supported wall or wire thickness should be at least 2mm to ensure the part won’t be broken during the cleaning process.

Min embossed detail

fcs_print_guide_icon_mineb010.4 mm high & wide

Due to the printer resolution, to ensure the detail printed clearly, make sure the dimension is greater than our minimum.

 

Min size for 1 escape hole

fcs_print_guide_icon_eh0125mm diameter

Escape hole is to remove the unbuild material in the part with hollow cavities, please ensure the escape hole for one hollow cavity is greater than the minimum diameter.

Single escape hole with barrier

Not advisable

Single escape hole with barrier around it will not let the powder full escape.

Lead time

5 to 7 working days

The entire printing process inclusive of several steps from printing -> drying -> removing powder -> applying super glue -> drying again. Re-print might be needed to ensure a best printed part.

Min print size

fcs_print_guide_icon_minb0110cm³

To ensure the successful creation of your part, please make sure your part is greater than our minimum print size.

Min unsupported part thickness

fcs_print_guide_icon_unsupwt013mm

Thickness of unsupported wall or wire should be at least 3mm to ensure the part won’t be broken during the cleaning process.

Min engrave detail

fcs_print_guide_icon_minen010.4 mm high & wide

Due to the printer resolution, to ensure the detail printed clearly, make sure the dimension is greater than our minimum.

 

Min size for more escape holes

fcs_print_guide_icon_eh0215mm diameter

If your part has more escape hole for one hollow cavity, they can be smaller in size. Please ensure the escape hole is greater than the minimum diameter in order to remove the unbuild material.

Hollow part without escape hole

Not advisable

The unbuild material in the hollow can’t be removed and this part will become an solid object.

More different materials coming soon!

Talk to us!

No matter you are 2D designer, 3D designer or a sculptor, talk to us, share your thoughts.

Things might not happen immediately somehow we can work together if there’s any opportunity down the road. Let’s get to know each other!

3D print service enquiry

6 + 5 =

Want to print your 3D model?

Get quote now!

Pin It on Pinterest

Share This

Share this post with your friends!